Toyota Century SUV inspection <\/h3>\n
![](\"https:\/\/cdn.motor1.com\/images\/static\/16x9-tr.png\")
\n
\n
\n
\n
\n
\n
\n<\/p>\n
Both had to undergo a rigorous training program to earn the necessary certification. Since the Century SUV is not a series production model, Toyota has the luxury of taking its time with each car it makes.\u00a0A master inspector goes through a laborious process that consists of 17 steps. The paint job must be perfect, and the engine bay must be immaculate.<\/p>\n
In addition, a master inspector must make sure there aren’t any panel gaps and unevenness at body panel joints. Pictured here is Moriaki Higa, one of the two master inspectors who had been involved in inspecting Lexus cars. He says the standards for the Century SUV are stricter than those for a Lexus.\u00a0He explains that paint inspection is usually done on a sampling of cars but for the Century SUV, each and every vehicle is thoroughly analyzed. There’s a so-called “coating clinic” where the models with problems are sent to fix paint defects observed during the inspection process.<\/p>\n
If everything is in order with the paint and the body, the Century then autonomously goes to a different inspection station to have its mechanical bits checked out. It drives itself in purely electric mode by taking advantage of its PHEV setup. City driving conditions are simulated, and Toyota makes any necessary final adjustments to the wheels and headlights. After that, the posh SUV once again drives itself, this time to a dedicated test course where it’s driven at higher speeds to detect any weird noises. A new test was created to analyze how the vehicle behaves when it’s in pure electric mode.<\/p>\n
All told, it takes three and a half hours from start to finish. Toyota projects it’ll sell 30 units each month.<\/p>\n